• Designed for portable tabletop use without cable
• Push button to turn on/off the microphone
• Unidirectional electret condenser microphone
• Red ring luminant to identify active microphone
• Pluggable gooseneck microphone (black or silver optional )
• LCD shows the unit number, channel number, RF signal, battery level
• Unit address and ID number can be set by up/down buttons
• Low battery voltage detection and alarm
• Integrated intelligent charging electronics
• Built-in USB port allows to upgrade firmware when necessary
• Optional 12.6V single charger with connecting cable

The conference unit allows the delegate to speak, request to speak and listen to speech. Each unit comes with headphone jack and volume control for the delegate to listen to the floor speaker and adjust volume level for comfortable listening.  Built-in speaker automatically mutes when microphone is live.  1 to 3 delegate microphones can be active at the same time.  Chairman unit can be active at any time and has an additional priority button to mute active delegate units to control the conference.   

      Technical Specifications:

• Modulation mode: DSSS
• Frequency range: 2405-2480MHz
• Frequency response: 50Hz -18kHz
• S/N ratio: -95dB/1mV
• Sensibility: -94dBm
• Power input: 24V DC
• RF module transmitting power: 10mW
• Battery: rechargeable 11.1V Li-ion battery pack
• Battery volume: 3000mAh
• Continuous operating time: 20 hours
• Headphone jack: 3.5mm 
• Built-in loudspeaker: 2W/8 ohms
• Backlit LCD: 65x32mm white-on-blue
• Microphone pick-up range: up to 600 mm
• Stable transmitting range: 20m by 20m
• Microphone stem length: 410mm
• Working temperature: 0-50℃
• Storage temperature: -20-50℃
• Dimensions: 205 x 60 x140mm (W*H*D)
• Weight: 0.55 kg
  

• Standard 19” rack mountable housing
• Selectable AUTO / FIFO operating modes
• Built-in FSC for acoustic feedback prevention
• Channel grouping to avoid interference
• LINE IN socket for external microphone input
• REC OUT for audio output to external sound equipment
• RF OUT socket (13-pin) for antenna cable connection
• 6 x DIP switches for setting channel numbers
• 1 x DIP switch for setting ID numbers

     Technical Specifications:

• Modulation mode: DSSS
• Frequency range: 2405-2480MHz
• Frequency response: 50-18KHz
• S/N ratio: 80dB
• Power supply: 220V / 50Hz or 110V / 60Hz
• Power consumpiton: 60W
• Audio inputs: 4 x RCA unbalanced
• Audio outputs: 4 x RCA unbalanced
• RCA recording audio outputs: 0 - 2.8Vpp
• RF antenna port: 13-pin connector
• Operating temperature: 0 to 50℃
• Dimensions (W*H*D): 423×90×320mm
• Weight: 7.55 kg

TL-RFF1 Wireless Access Point

      Features:

Offering wireless RF link for all conference units
Stable coverage area up to 20m by 20m
Powered by the central control unit
Can be installed indoor and outdoor
Fixed on wall or mounted on tripod

      Technical Specifications

Modulation mode: DSSS
Frequency range: 2405-2480MHz
Transmit power: 10mW
Gain: 5 dBi
Operating temperature: 0 to 50℃
Cable connector: 13-pin socket
Cable length: 3/5/10/15/20 metres
Range: 20x20 metres
Dimensions: 225x195x45 mm (W*H*D)
Weight: 3.87 kg

TL-RFV1 Camera Tracking Controller

Designed for DSSS wireless conference system
Supports up to 4 video cameras
RS485 for camera control
RJ45 for PC connection
Power consumpiton: 15W
Power Supply:  power adapter output 15V DC
Operating temperature：0-45℃
Storage temperature: -20-50℃
Dimensions: 210×50×140mm  (W×H×D)
Weight: 0.65Kg

GX-08 Charging Case    

Rugged, solid-construction case for secure transport & storage
Case stacking is allowed by steel knuckled ball corners
Smart charger to hold 8 microphone units with Li-ion battery packs
External power input socket for 15V/7A power adaptor
Charging status for each unit is visible from outside
Trickle charge function to keep batteries in full capacity
Automatic cut off when full to avoid over charge
Fully charged units may remain in the case
Fully charging time: 8 hours
Power supply: 100-240V, 50/60Hz
Power consumption: 105 watts
Dimensions: 58x41x51.5 cm (W*D*H)
Weight : 13.6 kg