Wireless Microphone GX-U201
Signal Splitter GX-ANT201-X
Features
◆ Ultra-high dynamic low noise components and ultra-wideband microstrip line design, with ultralow
internal distortion and loss, eliminating the mixing interference when multi-channel receiving
system is used at the same time;
◆ The antenna input connector has a power supply for the antenna amplifier, and can directly connect
the extended antenna with the antenna amplifier and the antenna with the built-in amplifier
◆ Carrier range is 500MHz~850MHz
◆ It can provide four broadband multi-channel receivers to share a pair of antennas, and can also
cascade a second distributor or broadband multi-channel receiver to simplify antenna assembly
engineering.
◆ The splitter provides 4 channels DC12V power outputs to power 4 wireless receivers, simplifying
cabinet installation
Technical Specifications
| Antenna Divider | 4-channel dual channel output |
| Frequency Range | 500MHz~850MHz |
| Input Truncation Point | +15dBm |
| Output/Input gain | +1.0dB±1dB |
| Output Isolation | >18dB(500MHz~850MHz) |
| Output/Input Impedance | 50Ω |
| Antenna Output Connector | TNC connector |
| Antenna Input Connector Power | DC8V,250mA(max)(Antenna A, B input end) |
| Power Input | 12V~15V/5ADC |
| Power Output | 12V/1.2ADC(each channel) |
| Current Consumption(Single) | Approx.145mA |
| Dimensions(W*D*H) | 480*180*45mm |
| Net Weight | 1.8Kg |
Antenna Combiner GX-ANT202-X
The passive one-to-two Antenna Divider | Combiner can either divide single channel signal into dual channels signal outputs or combine dual channels signals into single channel signal output.Simultaneously, it transmits power to the back-end amplifier, which is one of the essential accessories for erecting the antenna system.
Technical Specifications
| Type | Omni-directional external extension antenna |
| Frequency Range | 500MHz~850MHz |
| Attenuation | 4dB(typ.) |
| Isolation | 20dB(typ.) |
| System Impedance | 50Ω |
| Max. Volt / Current | DC 50V/1.5A |
| Connectors | TNC female*3 |
| Dimensions (W*D*H) | 92*74*21mm |
| Net Weight | 200g |
Antenna Amplifier GX-ANT203-X
Features
◆ Built-in adjustable gain amplifier, users can adjust the gain according to actual usage environment
◆ Amplifier using zinc alloy shell has excellent heat dissipation characteristics, which makes more stable
◆ Fixed stand can be installed independently with whip antenna, which is convenient for engineering use
◆ Applicable bandwidth covers 500Hz~850MHz
◆ Output -9~18dB(±1dB) continuously variable gain signal.
Technical Specifications
| Frequency Range | 500MHz~850MHz |
| Stepping Gain Total Gain | 0~+18dB(±2dB), stepping quantity: ±1dB |
| Stepping Attenuation Total Attenuation | 0~-9dB (±2dB),stepping quantity: ±1dB |
| Connectors | TNC female*2 |
| Current Consumption | Approx.60mA/DC8V |
| Power Supply | TNC female provides bias power 6~10VDC |
| System Impedance | 50Ω |
| Connecting Line | 2m |
Active Directional Antenna GX-ANT101-X
Features
◆ Uprofessional UHF band receiving logarithmic antenna
◆ Applicable bandwidth covers 500MHz~850MHz
◆ Output -9~18dB(±1dB) continuously variable gain signal
◆ Built-in adjustable gain amplifier, users can adjust the gain according to
actual usage environment
◆ Amplifier using zinc alloy shell has excellent heat dissipation
characteristics, which makes more stable.
◆ Have a good effect on the environments that require specific orientation
Technical Specifications
| Type | External extended antenna |
| Frequency Range | 500MHz~850MHz |
| Stepping Gain | 0~+18dB (±2dB), |
| Total Gain | stepping quantity: ±1dB |
| Stepping Attenuation | 0~-9dB (±2dB), |
| Total Attenuation | stepping quantity: ±1dB |
| Antenna Impedance | 50Ω |
| Antenna Gain | 3~5dB |
| Standing Wave Ratio | ≤2.5: 1 |
| Receiving Mode | 65° (Vertical), |
| (3dB Beam width) | 120°(Horizontal) |
| Connectors | TNC female*1 |
| Current Consumption | Approx. 60mA/DC8V |
| Power Supply | TNC female provides bias power 6~10VDC |
| Dimensions(W*D*H) | 302*252*23mm |
| Net Weight | Approx. 430g |
| Connecting Line | 4m |
Active Omni-directional Antenna GX-ANT102-X
Features
◆ Built-in adjustable gain amplifier, users can adjust the gain according to actual usage environment
◆ Amplifier using zinc alloy shell has excellent heat dissipation characteristics, which makes more stable
◆ Fixed stand can be installed independently with whip antenna, which is convenient for engineering use
◆ Applicable bandwidth covers 500Hz~850MHz
◆ Output -9~18dB(±1dB) continuously variable gain signal.
Technical Specifications
| Frequency Range | 500MHz~850MHz |
| Stepping Gain Total Gain | 0~+18dB(±2dB), stepping quantity: ±1dB |
| Stepping Attenuation Total Attenuation | 0~-9dB (±2dB),stepping quantity: ±1dB |
| Connectors | TNC female*2 |
| Current Consumption | Approx.60mA/DC8V |
| Power Supply | TNC female provides bias power 6~10VDC |
| System Impedance | 50Ω |
| Connecting Line | 2m |
Wireless Microphone GX-U201
Features
◆ Utilize UHF frequency to transmit, reduce the interference from outside signal
◆ Diverse antenna to receive the signal
◆ 80 meters effective distance
◆ Super wide LCD screen to display the system state
◆ Utilize PLL frequency synthetic technology, stable performance
◆ High-performance CPU to deal with multiple functions
◆ IR frequency 200*2 adjustable channels, multiple sets of devices operates simultaneously
◆ Hi-fi, wide frequency response, high dynamite range,Ultra-cardioid head
◆ Full-metal microphone shell, with drop resistance,durable quality
◆ Independent volume control
◆ External extendable receiving antenna
Technical Specifications
| Frequency Range | 590~890MHz |
| System | Diversity |
| Frequency Quantities | 200*2 |
| Bandwidth | 30MHz*2 |
| Sensitivity | <-97dBm for 30dB S/N Ratio |
| Frequency Deviation | ±68KHz |
| Frequency Response | 60~15000 Hz |
| SNR | >105dB(A) |
| THD | <0.5% |
| Dynamic Range | >100dB |
| Audio Jack | XLR+jack |
| Antenna Jack | 2TNC, 50Ω |
| Audio Output Level | XLR: +8dBu max |
Technical Specifications of Wireless Microphone
| Frequency Range | 590~890MHz |
| Frequency Quantities | 200*2 |
| Output power | 5mW/30mW |
| Vice-wave suppression | >70dBc |
| Bandwidth | 60MHz |
| Max Deviation Range | +48kHz |
| Frequency Response | 60~15000Hz |
| SNR | 105dB(A) |
| T.H.D | <0.5% |
| Input Voltage Range | mic 1V max |
| Power Supply | 2x1.5 V(AA) |
| Battery consumption | >8 hours |
