Gonsin Conference Equipment Co., LTD.
Gonsin Conference Equipment Co., LTD.

Products

Paperless Conference System-LCD Lifter

Paperless Meeting System
Paperless Office System
Paperless Conference System
Paperless Conference
Paperless Office Solutions
Paperless Meeting System
Paperless Conference System
Paperless Conference
Paperless Meeting System
Paperless Office System
Paperless Conference System
Paperless Conference
Paperless Office Solutions
Paperless Meeting System
Paperless Conference System
Paperless Conference
Get A Quote
Touch Control
Dual Screen Touch Control
LCD Lifter
Dual Screen Touch Control LCD Lifter
System Configuration

Functions of Touch Control LCD Lifting Terminal


Paperless Conference System Lcd Lifter Touch Control Lcd Lifting Terminal


Microphone

  • Work with chairman/delegate connector;

  • Auto straightening for mic when lifting down;

  • Microphone discussion modes: Operator/Auto/ FIFO/ VOX/ Request to speak( with software);

  • Unlimited number of chairman units or vice chairman units;

  • In VOX mode, microphones will be activated as users speak. VOX sensitivity (high/middle/low) and mic time-out can be adjusted by the server. Besides the chairman unit, 4 delegate unit can be activated at the same time;

  • Electret cardioid directional microphone brings better sound quality;

  • Highly resistant to mobile phone interference

  • Auto camera tracking with preset panoramic position; SD/HD camera tracking is supported;

  • Expansion function: can be connected with voting module and simultaneous interpretation module

  • The system supports auto repairing and hot sweeping;

  • Co-work with software, speaking time can be managed based on situation


Touch Control LCD Lifter

  • Separated lifting design for LCD screen and mic, with panel keys control lifting of both, flexible and easy  to operate; easy to hide and store the equipment;

  • The front screen is a 15.6/17.3/18.5 inch IPS full-view HD LCD screen(resolution 1920×1080) with 10  points touch; suit for paperless terminal;

  • Utilize low-speed micro-motor cooperate with high-quality timing belts and high-precision guide rails  and bearings, enabling fast and smooth lifting; wear-resisting design secures long service life;

    Low noise design produces low noise during lifting:

  • The default elevation angle is 15° when the LCD screen is lifted; support continuous adjustment within 0- 30°;

  • Lifter panels and chassis are made of aluminum alloy with light weight, high strength and exquisite  appearance;

  • Slim design with narrow bezel, the suitable 16:9 display scale provides superior users viewing experience.

  • Support 10 points touch, stable and sensitive;

  • Lifter panel has switches for: Up, Stop, Down, on and off for multimedia conference terminal;

  • The lifter supports manual control, wireless remote control, RS-232 control, RS-485 control, carrying out  unified control and grouping control for up/down/stop status of lifter

  • Support reading files from USB flash disk;

  • With HDMI and VGA interface, signals can be automatically identified, and can be switched by panel keys, when there is no signal input, the screen automatically enters the power-saving mode.

  • Support personalized customization: the voting module, simultaneous interpretation module, charging module and other modules can be customized. The integrated panel does not affect the appearance of the desktop.

  • The lifter has a power loop outlet socket, which reduces power wiring and makes the scene more tidy and beautiful.


Technical Parameters of Paperless Conference System-LCD Lifter


ModelGX-LF156CD-XGX-LF173CD-XGX-LF185CD-X
GX-LF156CX-XGX-LF173CX-XGX-LF185CX-X
GX-LF156ED-XGX-LF173ED-XGX-LF185ED-X
GX-LF156EX-XGX-LF173EX-XGX-LF185EX-X


Microphone
TypeCardioid directional electret
Frequency response20Hz~20kHz
Max SPL125 dB (THD<3%)
Dynamic range>85dB
VOX sensitivityH/M/L(76dB/80dB/82dB)
Sensitivity-46dB±4dB
THD<0.05%
SNR≥96dB
Mic length450mm


Front LCD Screen
Screen size375×250mm406×265mm446×285mm
Thickness5mm( the thinnest)/8mm( the thickest)10.5mm
Resolution ratio1920×1080dpi
Brightness220cd/㎡300cd/㎡260cd/㎡
Contrast800: 1
Screen visual angle85°/85°/85°/85°(up/down/left/right)
Display interfaceHDMI+VGA, auto recognization/switch through panel key


Touch screen(the front LCD screen equips)
TypeCapacitive touch, 10 points touch
Surface hardness7H
Antistatic Contact discharge4KV
Screen transparency>90%
Response time<5ms
Touch life> 50 million times


Lifter
Lifting up/down time30s
Screen elevation angleDefault 15°, adjustable within 0~30°
Control modeManual control, wireless remote control, RS-232 control, RS-485 control
Communication distanceWireless remote control: 30m, RS-232 control, RS-485 control: 1200m


Universal specifications
ColorSandblasted Black / Silver; Brushed Black / Silver (customizable)
MaterialAluminum alloy panel + aluminum alloy chassis
PowerVoltage AC220V±10% 50Hz (AC 110V customizable)
Maximum power25W
Operating temperature0~45°C
Panel dimension555×70×3mm601×70×3mm629.5×70×3mm
Case size539×60×647mm585×60×647mm615×60×716mm
Package size(carton)608×132×750mm660×132×750mm690×132×815mm
Net Weight14kg15kg16kg
Gross weight16.5kg17.5kg17.5kg


Functions of Dual Screen Touch Control LCD Lifting Terminal


Paperless Conference System Lcd Lifter Dual Screen Touch Control Lcd Lifting Terminal


Microphone

  • Work with chairman/delegate connector;

  • Auto straightening for mic when lifting down;

  • Microphone discussion modes: Operator/Auto/ FIFO/ VOX/ Request to speak( with software);

  • Unlimited number of chairman units or vice chairman units;

  • In VOX mode, microphones will be activated as users speak. VOX sensitivity (high/middle/low) and mic time-out can be adjusted by the server. Besides the chairman unit, 4 delegate unit can be activated at the  same time;

  • Electret cardioid directional microphone brings better sound quality;

  • Highly resistant to mobile phone interference

  • Auto camera tracking with preset panoramic position; SD/HD camera tracking is supported;

  • Expansion function: can be connected with voting module and simultaneous interpretation module

  • The system supports auto repairing and hot sweeping;

  • Co-work with software, speaking time can be managed based on situation


Touch Control LCD Lifter

  • Separated lifting design for LCD screen and mic, with panel keys control lifting of both, flexible and easy  to operate; easy to hide and store the equipment;

  • The front screen is a 15.6/17.3/18.5 inch IPS full-view HD LCD screen(resolution 1920×1080) with 10  points touch; suit for paperless terminal;

  • Utilize low-speed micro-motor cooperate with high-quality timing belts and high-precision guide rails  and bearings, enabling fast and smooth lifting; wear-resisting design secures long service life;

    Low noise design produces low noise during lifting:

  • The default elevation angle is 15° when the LCD screen is lifted; support continuous adjustment within 0- 30°;

  • Lifter panels and chassis are made of aluminum alloy with light weight, high strength and exquisite  appearance;

  • Slim design with narrow bezel, the suitable 16:9 display scale provides superior users viewing experience.

  • Support 10 points touch, stable and sensitive;

  • Lifter panel has switches for: Up, Stop, Down, on and off for multimedia conference terminal;

  • The lifter supports manual control, wireless remote control, RS-232 control, RS-485 control, carrying out  unified control and grouping control for up/down/stop status of lifter

  • Support reading files from USB flash disk;

  • With HDMI and VGA interface, signals can be automatically identified, and can be switched by panel keys, when there is no signal input, the screen automatically enters the power-saving mode.

  • Electronic nameplate: the back screen equips 11.6 inches super bright HD LCD screen( resolution  1366×768);16:9 display ratio for better and higher-quality image display.

  • Display user's information synchronously, such as user’s name/position or title/organization name/  Logo and etc.; support font/ background/ customized template.

  • Support personalized customization: the voting module, simultaneous interpretation module, charging module and other modules can be customized. The integrated panel does not affect the appearance of the desktop.

  • The lifter has a power loop outlet socket, which reduces power wiring and makes the scene more tidy and beautiful.


Technical Parameters of Dual Screen Touch Control LCD Lifting Terminal


ModelGX-LF156DD-XGX-LF173DD-XGX-LF185DD-X
GX-LF156DX-XGX-LF173DX-XGX-LF185DX-X
GX-LF156FD-XGX-LF173FD-XGX-LF185FD-X
GX-LF156FX-XGX-LF173FX-XGX-LF185FX-X


Microphone
TypeCardioid directional electret
Frequency response20Hz~20kHz
Max SPL125 dB (THD<3%)
Dynamic range>85dB
VOX sensitivityH/M/L(76dB/80dB/82dB)
Sensitivity-46dB±4dB
THD<0.05%
SNR≥96dB
Mic length450mm


Back LCD Screen
Display size11.6 inches,256mm(H)×144mm(V)
Resolution ratio1366×768dpi
Brightness300cd/
Contrast600:1
Screen visual angle85°/85°/85°/85°(up/down/left/right)


Front LCD Screen
Screen size375×250mm406×265mm446×285mm
Thickness5mm( the thinnest)/16mm( the thickest)10.5mm
Resolution ratio1920×1080dpi
Brightness220cd/㎡300cd/260cd/㎡
Contrast800:1
Screen visual angle85°/85°/85°/85°(up/down/left/right)
Display interfaceHDMI+VGA, auto recognization/switch through panel key


Touch screen(the front LCD screen equips)
TypeCapacitive touch, 10 points touch
Surface hardness7H
Antistatic Contact discharge4KV
Screen transparency>90%
Response time<5ms
Touch life> 50 million times


Lifter
Lifting up/down timeLCD 30s; MIC 50s
Screen elevation angleDefault 15°, adjustable within 0~30°
Control modeManual control, wireless remote control, RS-232 control, RS-485 control
Communication distanceWireless remote control: 30m; RS-232: 15m ; RS-485 : 1200m


Universal specifications
ColorSandblasted Black / Silver; Brushed Black / Silver (customizable)
MaterialAluminum alloy panel + aluminum alloy chassis
PowerVoltage AC220V±10% 50Hz (AC 110V customizable)
Maximum power25W
Operating temperature0~45°C
Panel dimension555×70×3mm601×70×3mm629.5×70×3mm
Case size539×60×647mm585×60×647mm615×60×716mm
Package size(carton)608×132×750mm660×132×750mm690×132×815mm
Net Weight14.2kg15.2kg16.2kg
Gross weight16.7kg17.7kg19.2kg


Functions of Touch Control LCD Lifter


Paperless Conference System Lcd Lifter Touch Control


  • Separated lifting design for LCD screen and mic, with panel keys control lifting  of both, flexible and easy to operate; easy to hide and store the equipment;

  • The front screen is a 15.6/17.3/18.5 inch IPS full-view HD LCD screen(resolution  1920×1080) with 10 points touch; suit for paperless terminal

  • Utilize low-speed micro-motor and strengthened wire rope gearing, enabling  fast and smooth lifting; wear-resisting design secures long service life;

    Low noise design produces low noise during lifting:

  • The default elevation angle is 15° when the LCD screen is lifted; support  continuous adjustment within 0~30°;

  • Lifter panels and chassis are made of aluminum alloy with light weight, high  strength and exquisite appearance;

  • Slim design with narrow bezel, the suitable 16:9 display scale provides superior users viewing experience.

  • Support 10 points touch, stable and sensitive;

  • Lifter panel has switches for Up, Stop, Down, on and off for multimedia  conference terminal;

  • The lifter supports manual control, wireless remote control, RS-232 control, RS- 485 control, carrying out unified control and grouping control for up/down/stop  status of lifter

  • Support reading files from USB flash disk;

  • With HDMI and VGA interface, signals can be automatically identified and can be switched by panel keys.


Technical Parameters of Touch Control LCD Lifter


ModelGX-LF156-XGX-LF173-XGX-LF185-X
Front LCD Screen
Screen size375×250mm406×265mm446×285mm
Thickness5mm(the thinnest)/8mm(the thickest)10.5mm
Resolution ratio1920×1080dpi
Brightness220cd/m2300cd/m2260cd/m2
Contrast800: 1
Screen visual angle85°/85°/85°/85°(up/down/left/right)
Display interfaceHDMI+VGA, auto recognization/switch through panel key
Touch screen(the front LCD screen equips)
TypeCapacitive touch, 10 points touch
Surface hardness7H
Antistatic Contact discharge4KV
Screen transparency>90%
Response time<5ms
Touch life> 50 million times
Lifter
Lifting up/down time30s
Screen elevation angleDefault 15°, adjustable within 0~30°
Control modeManual control, wireless remote control, RS-232 control, RS-485 control
Communication distanceWireless remote control: 30m, RS-232 control, RS-485 control: 1200m
Universal specifications
ColorSilver/Black(customizable)
MaterialAluminum alloy panel + aluminum alloy chassis
PowerVoltage AC220V±10% 50Hz (AC 110V customizable)
Maximum power25W
Operating temperature0~45°C
Panel dimension430×70×3mm476×70×3mm510×70×3mm
Case size415×60×562mm461×60×562mm495×60×647mm
Package size(carton)488×132×660mm538×132×660mm565×132×745mm
Net Weight7kg8kg9kg
Gross weight9kg10kg11.5kg


Functions of Dual Screen Touch Control LCD Lifter


Paperless Conference System Lcd Lifter Dual Screen Touch Control


  • Separated lifting design for LCD screen and mic, with panel keys control lifting of both, flexible and easy to operate; easy to hide and store the equipment;

  • The front screen is a 15.6/17.3/18.5 inch IPS full-view HD LCD screen(resolution  1920×1080) with 10 points touch; suit for paperless terminal

  • Utilize low-speed micro-motor and strengthened wire rope gearing,  enabling fast and smooth lifting; wear-resisting design secures long  service life;

    Low noise design produces low noise during lifting:

  • The default elevation angle is 15° when the LCD screen is lifted; support  continuous adjustment within 0~30°;

  • Lifter panels and chassis are made of aluminum alloy with light weight, high strength and exquisite appearance;

  • Slim design with narrow bezel, the suitable 16:9 display scale provides superior users viewing experience.

  • Support 10 points touch, stable and sensitive;

  • Lifter panel has switches for: Up, Stop, Down, on and off for multimedia  conference terminal;

  • The lifter supports manual control, wireless remote control, RS-232 control, RS-485 control, carrying  out unified control and grouping control for up/down/stop status of lifter

  • Support reading files from USB flash disk;

  • With HDMI and VGA interface, signals can be automatically identified, and can be switched by panel keys.

  • Electronic nameplate: the back screen equips 11.6 inches super bright HD LCD screen( resolution  1366×768);16:9 display ratio for better and higher-quality image display.

  • Display user's information synchronously, such as user’s name/position or title/organization name/  Logo and etc.; support font/ background/ customized template.


Technical Parameters of Dual Screen Touch Control LCD Lifter


ModelGX-LF156B-XGX-LF173B-XGX-LF185B-X
Front LCD Screen
Screen size375×250mm406×265mm446×285mm
Thickness5mm(the thinnest)/8mm(the thickest)10.5mm
Resolution ratio1920×1080dpi
Brightness220cd/m2300cd/m2260cd/m2
Contrast800: 1
Screen visual angle85°/85°/85°/85°(up/down/left/right)
Display interfaceHDMI+VGA, auto recognization/switch through panel key
Back LCD Screen
Display size11.6 inches,256mm(H)×144mm(V)
Resolution ratio1366×768dpi
Brightness300cd/㎡
Contrast600:1
Screen visual angle85°/85°/85°/85°(up/down/left/right)
Touch screen(the front LCD screen equips)
TypeCapacitive touch, 10 points touch
Surface hardness7H
Antistatic Contact discharge4KV
Screen transparency>90%
Response time<5ms
Touch life> 50 million times
Lifter
Lifting up/down time30s
Screen elevation angleDefault 15°, adjustable within 0~30°
Control modeManual control, wireless remote control, RS-232 control, RS-485 control
Communication distanceWireless remote control: 30m, RS-232 control, RS-485 control: 1200m
Universal specifications
ColorSilver/Black(customizable)
MaterialAluminum alloy panel + aluminum alloy chassis
PowerVoltage AC220V±10% 50Hz (AC 110V customizable)
Maximum power25W
Operating temperature0~45°C
Panel dimension430×70×3mm476×70×3mm510×70×3mm
Case size415×60×562mm461×60×562mm495×60×647mm
Package size(carton)488×132×660mm538×132×660mm565×132×745mm
Net Weight7.2kg8.2kg9.2kg
Gross weight9.2kg10.2kg11.7kg


System Configuration of Paperless Conference System-LCD Lifter

Paperless Conference System-LCD Lifter

System Configuration Products of Paperless Conference System-LCD Lifter




Contact Us

Gonsin is here to offer you the customized solutions for conference audio and video system.

Please fill in the information truthfully so that we can contact you and provide services as soon as possible.



Related Products of Paperless Conference System-LCD Lifter
Delivering Trust & Value
You can
trust .
Copyright © Gonsin Conference Equipment Co., LTD. All Rights Reserved.